Easily Moved Equipment - Davit Cranes

eme Davit Cranes

Untitled Document

Benefits to Using the eme DAVIT Crane

The lightness and portability reduce the chance of operator injury (the 1100 DAVIT weighs only 31 lbs, pre-hoist).

One eme DAVIT Crane will save money by allowing the lowest davit-to-socket ratio per region. It eliminates one-piece steel DAVITS at every pump site; when adding sites, just add sockets for the existing eme DAVIT Crane, eliminating
the need for expensive crane trucks or permanent lifting equipment at lifting sites.

The lightweight eme DAVIT Crane is easy to use which promotes timely maintenance of pumps and motors.

Greater design flexibility results from being able to put the correct type of maintenance lifting equipment where it is really needed, without any compromise.

The Winning Features of the eme DAVIT Cranes:

WLL: 1100 lb. (500 kg)
Assembled Weight: 68 lbs
Folds up to 56 in. Package (1.4 m)
Available with Chain Hoist
Corrosion Resistant Aluminum Alloy
Assembled Height Under Lift Ring: 78 - 84in. (1.98 - 2.13m)

1100CH DAVIT (Chain Host)

This 31-lb. eme DAVIT can be used with either a Manual or Electric Chain Hoist.
A Radius Adjustment Strap is designed to absorb much of the shock load when raising or lowering submersible pumps.
Bushings reduce turning friction when the eme DAVIT is under load.
A powdercoated surface means easy cleanup.
This eme DAVIT is designed for close placement to safety railings, beside tanks or well openings. This unique design means that Sockets can be placed close to the work area,
eliminating their presence in the middle of walkways; this improves Operator safety.

Custom Height, Radius and Lifting Capacity DAVITS available

Contact eme or your eme dealer for information on the correctly
sized manual or electric chain hoist for your 1100CH DAVIT Crane

eme Davit Cranes

TIP: Mounting the eme 1100W DAVIT in a Top Mount Socket (Center or End Plate models) provides the maximum lifting height possible (approximately 80 in. below the Davit arm)

1100W DAVIT (with Winch)

By far, the lightest for capacity, Winch-equipped DAVITS available to the Waterand Wastewater Industries, this 53-lb. eme DAVIT (including Winch, Cable and Hook) comes standard with 60 feet of ¼-inch, 316 Stainless Steel Cable and Hook.
The Winch has a ‘quick cable attach and release’, making it easy to attach cables that are attached permanently to
submersible pumps.
The Winch has a galvanized coating which gives it a long life when exposed to the elements.
The Winch remains attached to the DAVIT arm; if required, the DAVIT arm can be detached quickly from the upright for easy carrying and storage.

750, 2200 and 3300 DAVIT Cranes

Due to challenges in the field where the maximum radius for lifting the pumps exceeds the reach of the 1100 DAVIT, or the object to be lifted is relatively light, we have developed the above three eme DAVIT Cranes which can do the job in a specific situation.